ASTM Standards Packages with 29 CFR, 40 CFR and/or 49 CFR
Click to enlarge
29 CFR |
40 CFR |
49 CFR |
CFR ASTM Combo Collection |
||
ASTM designations (e.g., D93-79) are "codified" in the Federal regulations. A challenge has always been that Federal agencies rarely update the regulations to include the current ASTM designations as often as the designations change. When a CyberRegs’ subscriber clicks on the ASTM hyperlink within a regulation, the most up-to-date version of that particular standard renders, as well as later versions.
Contact customer service today to add to your CyberRegs subscription800-808-3372
CustomerService@CyberRegs.com
29 CFR ASTM Labor Collection
Whether you need to review ASTM standards such as Standard Specification for Grade 80 Alloy Steel Chain or Iron Castings to Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester in 29 CFR Parts 1910, 1915, or 1926, CyberRegs can provide that level of detail. Never again will you have to search for current ASTM standards while referencing 29 CFR.
| ASTM A391 | Standard Specification for Grade 80 Alloy Steel Chain |
| ASTM A395 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM B241 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM C192 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM C31 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C39 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ASTM C42 | Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete |
| ASTM C495 | Standard Test Method for Compressive Strength of Lightweight Insulating Concrete |
| ASTM C684 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens |
| ASTM C803 | Standard Test Method for Penetration Resistance of Hardened Concrete |
| ASTM C873 | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ASTM C918 | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| ASTM D149 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| ASTM D2488 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) |
| ASTM D3176 | Standard Practice for Ultimate Analysis of Coal and Coke |
| ASTM D3180 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D5 | Standard Test Method for Penetration of Bituminous Materials |
| ASTM D653 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM E329 | Standard Specification for Agencies Engaged in Construction Inspection and/or Testing |
| ASTM F1116 | Standard Test Method for Determining Dielectric Strength of Dielectric Footwear |
| ASTM F1117 | Standard Specification for Dielectric Footwear |
| ASTM F1236 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products |
| ASTM F1505 | Standard Specification for Insulated and Insulating Hand Tools |
| ASTM F1506 | Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards |
| ASTM F712 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM F819 | Standard Terminology Relating to Electrical Protective Equipment for Workers |
| ASTM F887 | Standard Specifications for Personal Climbing Equipment |
| ASTM F914 | Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments |
| ASTM F968 | Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM A126 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings |
| ASTM A47 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM D178 | Standard Specification for Rubber Insulating Matting |
| ASTM D2161 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D3278 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D445 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D88 | Standard Test Method for Saybolt Viscosity |
| ASTM F478 | Standard Specification for Zinc Yellow (Zinc Chromate) Pigments |
| ASTM F479 | Standard Specification for In-Service Care of Insulating Blankets |
| ASTM F496 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves |
| ASTM F711 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
| ASTM F855 | Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment |
| ASTM B210 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes |
| ASTM D1048 | Standard Specification for Rubber Insulating Blankets |
| ASTM D1051 | Standard Specification for Rubber Insulating Sleeves |
| ASTM D120 | Standard Specification for Rubber Insulating Gloves |
| ASTM A53 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM D1049 | Standard Specification for Rubber Insulating Covers |
| ASTM D1050 | Standard Specification for Rubber Insulating Line Hose |
| ASTM D86 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure |
| ASTM D323 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
| ASTM D56 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM B88 | Standard Specification for Seamless Copper Water Tube |
| ASTM D93 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
40 CFR ASTM Protection of Environment Collection
Over 270 ASTM standards are referenced in 54 parts of 40 CFR, from Standard Specification for Ferrosilicon to Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi. CyberRegs subscribers can have up-to-date ASTM standards at their fingertips along with an entire suite of productivity tools.
| ASTM A100 | Standard Specification for Ferrosilicon |
| ASTM A101 | Standard Specification for Ferrochromium |
| ASTM A482 | Standard Specification for Ferrochrome-Silicon |
| ASTM A483 | Standard Specification for Silicomanganese |
| ASTM A495 | Standard Specification for Calcium-Silicon Alloys |
| ASTM A99 | Standard Specification for Ferromanganese |
| ASTM B362 | Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal |
| ASTM B389 | Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal |
| ASTM C1315 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete |
| ASTM C581 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ASTM D1072 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
| ASTM D1193 | Standard Specification for Reagent Water |
| ASTM D1217 | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
| ASTM D1250 | Standard Guide for Use of the Petroleum Measurement Tables |
| ASTM D1253 | Standard Test Method for Residual Chlorine in Water |
| ASTM D1259 | Standard Test Methods for Nonvolatile Content of Resin Solutions |
| ASTM D1266 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
| ASTM D1267 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
| ASTM D129 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) |
| ASTM D1293 | Standard Test Methods for pH of Water |
| ASTM D1298 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D1310 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| ASTM D1319 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption |
| ASTM D1331 | Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents |
| ASTM D140 | Standard Practice for Sampling Bituminous Materials |
| ASTM D1452 | Standard Practice for Soil Exploration and Sampling by Auger Borings |
| ASTM D1475 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D1480 | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer |
| ASTM D1481 | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
| ASTM D1552 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) |
| ASTM D1613 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D1640 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D1655 | Standard Specification for Aviation Turbine Fuels |
| ASTM D1796 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| ASTM D1826 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter |
| ASTM D1835 | Standard Specification for Liquefied Petroleum (LP) Gases |
| ASTM D1836 | Standard Specification for Commercial Hexanes |
| ASTM D1837 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases |
| ASTM D1838 | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
| ASTM D1863 | Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
| ASTM D1890 | Standard Test Method for Beta Particle Radioactivity of Water |
| ASTM D1943 | Standard Test Method for Alpha Particle Radioactivity of Water |
| ASTM D1945 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D1946 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
| ASTM D2013 | Standard Practice for Preparing Coal Samples for Analysis |
| ASTM D2099 | Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester |
| ASTM D2158 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
| ASTM D2163 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
| ASTM D2216 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D2234 | Standard Practice for Collection of a Gross Sample of Coal |
| ASTM D2359 | Standard Specification for Refined Benzene-535 |
| ASTM D2369 | Standard Test Method for Volatile Content of Coatings |
| ASTM D2372 | Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D240 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
| ASTM D2492 | Standard Test Method for Forms of Sulfur in Coal |
| ASTM D2502 | Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements |
| ASTM D2503 | Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure |
| ASTM D2504 | Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography |
| ASTM D2584 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D2597 | Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography |
| ASTM D2598 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
| ASTM D2622 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D2697 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D2699 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
| ASTM D2700 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
| ASTM D2709 | Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
| ASTM D2713 | Standard Test Method for Dryness of Propane (Valve Freeze Method) |
| ASTM D2784 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) |
| ASTM D287 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
| ASTM D2879 | Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope |
| ASTM D2880 | Standard Specification for Gas Turbine Fuel Oils |
| ASTM D2908 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM D2996 | Standard Specification for Filament-Wound “Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D2997 | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D3084 | Standard Practice for Alpha-Particle Spectrometry of Water |
| ASTM D3120 | Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
| ASTM D3172 | Standard Practice for Proximate Analysis of Coal and Coke |
| ASTM D3173 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
| ASTM D3174 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D3176 | Standard Practice for Ultimate Analysis of Coal and Coke |
| ASTM D3177 | Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke |
| ASTM D3178 | Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke |
| ASTM D323 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
| ASTM D3231 | Standard Test Method for Phosphorus in Gasoline |
| ASTM D3237 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| ASTM D3238 | Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
| ASTM D3246 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D3257 | Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography |
| ASTM D3262 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ASTM D3270 | Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ASTM D3278 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D3286 | Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter |
| ASTM D3299 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D3328 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
| ASTM D3338 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D3343 | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| ASTM D3370 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D346 | Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis |
| ASTM D3517 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM D3574 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM D3588 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
| ASTM D3606 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
| ASTM D3614 | Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
| ASTM D3683 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption |
| ASTM D3684 | Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method |
| ASTM D3695 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography |
| ASTM D3754 | Standard Specification for 'Fiberglass' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ASTM D3792 | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
| ASTM D3826 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
| ASTM D3839 | Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe |
| ASTM D3840 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| ASTM D388 | Standard Classification of Coals by Rank |
| ASTM D3912 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants |
| ASTM D3925 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D396 | Standard Specification for Fuel Oils |
| ASTM D3972 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry |
| ASTM D3982 | Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts |
| ASTM D4017 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D4024 | Standard Specification for Machine Made “Fiberglass'' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D4052 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D4057 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D4059 | Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography |
| ASTM D4082 | Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants |
| ASTM D4084 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D4097 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D4161 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals1, 2 |
| ASTM D4177 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D420 | Standard Guide to Site Characterization for Engineering Design and Construction Purposes |
| ASTM D4239 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods |
| ASTM D4294 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
| ASTM D4420 | Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography |
| ASTM D4442 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D4444 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
| ASTM D445 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D4457 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM D4468 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D4606 | Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method |
| ASTM D4629 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D471 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D4734 | Standard Specification for Refined Benzene-545 |
| ASTM D4747 | Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography |
| ASTM D4809 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
| ASTM D4810 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
| ASTM D4814 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D4815 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography |
| ASTM D482 | Standard Test Method for Ash from Petroleum Products |
| ASTM D4827 | Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography |
| ASTM D4840 | Standard Guide for Sample Chain-of-Custody Procedures |
| ASTM D4891 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion |
| ASTM D5066 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis |
| ASTM D5087 | Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D5186 | Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography |
| ASTM D5191 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
| ASTM D5197 | Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
| ASTM D5198 | Standard Practice for Nitric Acid Digestion of Solid Waste |
| ASTM D5208 | Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| ASTM D5228 | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
| ASTM D523 | Standard Test Method for Specular Gloss |
| ASTM D524 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| ASTM D5261 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D5287 | Standard Practice for Automatic Sampling of Gaseous Fuels |
| ASTM D5291 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D5317 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
| ASTM D5364 | Standard Guide for Design‚ Fabrication‚ and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units |
| ASTM D5373 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal |
| ASTM D5403 | Standard Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM D5453 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence |
| ASTM D5500 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D5504 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D5527 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D5598 | Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling |
| ASTM D5599 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
| ASTM D56 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D5673 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D5741 | Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer |
| ASTM D5762 | Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence |
| ASTM D5769 | Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry |
| ASTM D5790 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
| ASTM D5797 | Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines |
| ASTM D5798 | Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines |
| ASTM D5842 | Standard Practice for Sampling and Handling of Fuels for Volatility Measurement |
| ASTM D5854 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D5865 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D5965 | Standard Test Methods for Specific Gravity of Coating Powders |
| ASTM D6021 | Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
| ASTM D6053 | Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes |
| ASTM D6093 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D613 | Standard Test Method for Cetane Number of Diesel Fuel Oil |
| ASTM D6216 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications |
| ASTM D6228 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
| ASTM D6266 | Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D6299 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
| ASTM D6323 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D6348 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ASTM D6357 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D6419 | Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks |
| ASTM D6420 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
| ASTM D6522 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers |
| ASTM D6581 | Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography |
| ASTM D6589 | Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance |
| ASTM D6615 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
| ASTM D6667 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence |
| ASTM D6721 | Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry |
| ASTM D6722 | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis |
| ASTM D6735 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method |
| ASTM D6751 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels |
| ASTM D6784 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
| ASTM D6888 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D6911 | Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis |
| ASTM D6920 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection |
| ASTM D6985 | Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications |
| ASTM D7036 | Standard Practice for Competence of Air Emission Testing Bodies |
| ASTM D7039 | Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D737 | Standard Test Method for Air Permeability of Textile Fabrics |
| ASTM D808 | Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method) |
| ASTM D814 | Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids |
| ASTM D86 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure |
| ASTM D910 | Standard Specification for Aviation Gasolines |
| ASTM D92 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
| ASTM D923 | Standard Practices for Sampling Electrical Insulating Liquids |
| ASTM D93 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
| ASTM D95 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation |
| ASTM D97 | Standard Test Method for Pour Point of Petroleum Products |
| ASTM D975 | Standard Specification for Diesel Fuel Oils |
| ASTM D976 | Standard Test Method for Calculated Cetane Index of Distillate Fuels |
| ASTM E1147 | Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography |
| ASTM E1148 | Standard Test Method for Measurements of Aqueous Solubility |
| ASTM E1163 | Standard Test Method for Estimating Acute Oral Toxicity in Rats |
| ASTM E1193 | Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests |
| ASTM E1218 | Standard Guide for Conducting Static Toxicity Tests with Microalgae |
| ASTM E1295 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia |
| ASTM E1367 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM E1368 | Standard Practice for Visual Inspection of Asbestos Abatement Projects |
| ASTM E1391 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
| ASTM E145 | Standard Specification for Gravity-Convection And Forced-Ventilation Ovens |
| ASTM E162 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| ASTM E1625 | Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS) |
| ASTM E168 | Standard Practices for General Techniques of Infrared Quantitative Analysis |
| ASTM E169 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis |
| ASTM E1719 | Standard Test Method for Vapor Pressure of Liquids by Ebulliometry |
| ASTM E1727 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E1728 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E1782 | Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
| ASTM E1792 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E180 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals |
| ASTM E220 | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
| ASTM E224 | Standard Test Methods for Analysis of Hydrochloric Acid |
| ASTM E258 | Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method |
| ASTM E260 | Standard Practice for Packed Column Gas Chromatography |
| ASTM E29 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E300 | Standard Practice for Sampling Industrial Chemicals |
| ASTM E50 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E515 | Standard Test Method for Leaks Using Bubble Emission Techniques |
| ASTM E662 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
| ASTM E681 | Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
| ASTM E697 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM E711 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
| ASTM E729 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
| ASTM E775 | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
| ASTM E776 | Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel |
| ASTM E84 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E84 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E871 | Standard Test Method for Moisture Analysis of Particulate Wood Fuels |
| ASTM E885 | Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy |
| ASTM F1194 | Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing |
| ASTM F1216 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube |
| ASTM F1383 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM F1471 | Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System |
| ASTM F316 | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM F631 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments |
| ASTM F715 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage |
| ASTM F739 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact |
| ASTM G21 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
49 CFR ASTM Transportation Collection
Nearly 100 ASTM Standards make up 49 CFR. CyberRegs subscribers have the most current ASTM standards such as Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable to Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials at their disposal.
| ASTM A1008 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
| ASTM A1011 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| ASTM A106 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
| ASTM A20 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A240 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate‚ Sheet‚ and Strip for Pressure Vessels and for General Applications |
| ASTM A242 | Standard Specification for High-Strength Low-Alloy Structural Steel |
| ASTM A262 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM A285 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
| ASTM A302 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM A333 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
| ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A372 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
| ASTM A381 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A47 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A514 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| ASTM A515 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A516 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASTM A53 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A537 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| ASTM A572 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| ASTM A588 | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
| ASTM A606 | Standard Specification for Steel‚ Sheet and Strip‚ High-Strength‚ Low-Alloy‚ Hot-Rolled and Cold-Rolled‚ with Improved Atmospheric Corrosion Resistance |
| ASTM A607 | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled |
| ASTM A612 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service |
| ASTM A622 | Standard Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled |
| ASTM A633 | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
| ASTM A656 | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
| ASTM A671 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM A672 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| ASTM A691 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM A715 | Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM B162 | Standard Specification for Nickel Plate‚ Sheet‚ and Strip |
| ASTM B209 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B221 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B456 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium |
| ASTM B557 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| ASTM B580 | Standard Specification for Anodic Oxide Coatings on Aluminum |
| ASTM C1166 | Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories |
| ASTM C150 | Standard Specification for Portland Cement |
| ASTM C90 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM D1003 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D1056 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber1,2 |
| ASTM D1121 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D1123 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D1193 | Standard Specification for Reagent Water |
| ASTM D1200 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ASTM D1238 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| ASTM D1415 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D1709 | Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
| ASTM D1835 | Standard Specification for Liquefied Petroleum (LP) Gases |
| ASTM D1838 | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
| ASTM D1922 | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
| ASTM D2513 | Standard Specification for Thermoplastic Gas Pressure Pipe‚ Tubing‚ and Fittings |
| ASTM D2517 | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
| ASTM D2724 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D3278 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D3574 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM D3675 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM D3828 | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester |
| ASTM D3953 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D4206 | Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus |
| ASTM D4329 | Standard Practice for Fluorescent UV Exposure of Plastics |
| ASTM D4359 | Standard Test Method for Determining Whether a Material Is a Liquid or a Solid |
| ASTM D445 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D471 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D4956 | Standard Specification for Retroreflective Sheeting for Traffic Control |
| ASTM D56 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D638 | Standard Test Method for Tensile Properties of Plastics |
| ASTM D93 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
| ASTM E1 | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E112 | Standard Test Methods for Determining Average Grain Size |
| ASTM E1136 | Standard Specification for A Radial Standard Reference Test Tire |
| ASTM E114 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method |
| ASTM E119 | Standard Test Methods for Fire Tests of Building Construction and Materials |
| ASTM E1337 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire |
| ASTM E1354 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E1537 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E1590 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E162 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| ASTM E213 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing |
| ASTM E23 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E274 | Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire |
| ASTM E290 | Standard Test Methods for Bend Testing of Material for Ductility |
| ASTM E298 | Standard Test Methods for Assay of Organic Peroxides |
| ASTM E4 | Standard Practices for Force Verification of Testing Machines |
| ASTM E501 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
| ASTM E648 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source |
| ASTM E662 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
| ASTM E681 | Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
| ASTM E77 | Standard Test Method for Inspection and Verification of Thermometers |
| ASTM E8 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F1055 | Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing |
| ASTM F1805 | Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces |
| ASTM F377 | Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires |
| ASTM F792 | Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems |
| ASTM G151 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
| ASTM G154 | Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials |
CFR ASTM Combo Collection
Can you imagine purchasing 400 static PDFs? Automatically-updated ASTM Standards within 29, 40, and 49 CFR is the ultimate package for those Environmental, Health & Safety and Transportation professionals who need easy access to ASTM standards and want to use them in conjunction with productivity-enhancing CyberRegs tools.
*Includes all ASTM Standards referenced above
